The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

DB Smith · 11-08-2008, 02:25 PM

OK just to clarify, The starter motor isn't spinning at all, or it's turning over but not firing up?

You eliminated your resistor wire? Is your power to hooked up to IGN. UNFUSED at the fuse box?

Check to be sure you have the power wire (probably purple) hooked up to the solenoid. It should be on the post that is NOT marked "R".

11-08-2008, 02:25 PM	#2
DB Smith Old Shovel Rider Join Date: Oct 2007 Location: Rain City, WA. Posts: 117	Re: HEI Install Help! OK just to clarify, The starter motor isn't spinning at all, or it's turning over but not firing up? You eliminated your resistor wire? Is your power to hooked up to IGN. UNFUSED at the fuse box? Check to be sure you have the power wire (probably purple) hooked up to the solenoid. It should be on the post that is NOT marked "R". __________________ Daryl.... *'68 C/10 Stepside* *2007 Build Page* *DS Originals* *Old Bikers.US* Last edited by DB Smith; 11-08-2008 at 02:26 PM.