The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

rigo · 02-23-2003, 08:44 PM

one thing that works well when you can't get to the back side of the fender is to put a dab of silicone on the studs of the emblem place the emblem in place and put a piece of masking tape over the emblem to hold it on the fender till the silicone cures... great way to keep the emblems on...and they won't rattle if your panels vibrate.

02-23-2003, 08:44 PM	#7
rigo Flake Daddy Join Date: Jan 2003 Location: Plainview TEXAS Posts: 456	one thing that works well when you can't get to the back side of the fender is to put a dab of silicone on the studs of the emblem place the emblem in place and put a piece of masking tape over the emblem to hold it on the fender till the silicone cures... great way to keep the emblems on...and they won't rattle if your panels vibrate. __________________ 1968 SWB Fleet Daily Driver 350/TH400 shaved driprail,emblems,tailgate,air ride suspension 1964 Pontiac Catalina 2dr. hardtop shaved everything, air ride suspension 1998 Range Rover 1960 El Camino....in the works.....