The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

GOPAPA · 11-22-2008, 12:23 PM

I just had to buy one and put it in my truck ..It's called a pan hard bar ,,or tracking bar

I used a large vice to install the bushings but first I took 220 sand paper and sanded out the light rust and then wiped oil inside the housing before I pressed the bushings in.. hope this helps papa

If you click on search and enter pan hard bar you will get more info on this ..

11-22-2008, 12:23 PM	#2
GOPAPA Registered User Join Date: Oct 2007 Location: Nampa Idaho Posts: 7,628	Re: rear control arm?? I just had to buy one and put it in my truck ..It's called a pan hard bar ,,or tracking bar I used a large vice to install the bushings but first I took 220 sand paper and sanded out the light rust and then wiped oil inside the housing before I pressed the bushings in.. hope this helps papa If you click on search and enter pan hard bar you will get more info on this .. __________________ When you learn a thing a day you store up smart.