View Single Post
Old 11-29-2008, 03:29 PM   #15
phipp13
THE DAMN YANKEE
 
phipp13's Avatar
 
Join Date: Sep 2006
Location: Southern MD
Posts: 551
Re: Starting the beast. Any tips i should know?

if your not running roller lifters make sure that your running at least 1600 to 2000 rpm so your lifters are spinning if not you may damage your cam. easy way to tell is if your pushrods are spinning. if you are running roller lifters delay my last. good luck phipp13
phipp13 is offline   Reply With Quote