The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

OrangeCrush1970 · 02-03-2009, 03:31 PM

I just replaced the modulator and rubber on both ends of the vacuum tube. When I pulled the old modulator off, there was a little fluid inside. Not too much which makes me think that it just started going bad.

It's shifting good now, i'll keep an eye on it and see if there are anymore issues, but I think I have the problem solved. It was a very simple operation (w/ the help of David's lift, etc.) and I figured yall would like some pics. Yes, it is very wet...

Thanks for the help fellas

02-03-2009, 03:31 PM	#10
OrangeCrush1970 Registered User Join Date: Jun 2007 Location: Smyrna, GA Posts: 709	Re: TH350 hanging onto 2nd I just replaced the modulator and rubber on both ends of the vacuum tube. When I pulled the old modulator off, there was a little fluid inside. Not too much which makes me think that it just started going bad. It's shifting good now, i'll keep an eye on it and see if there are anymore issues, but I think I have the problem solved. It was a very simple operation (w/ the help of David's lift, etc.) and I figured yall would like some pics. Yes, it is very wet... Thanks for the help fellas Attached Images __________________ *Rottenwood Garage* 1970...71...72 C1500 aka Orange aka Sideshow Bob 540 BB Straub Roller Cam, AFR Magnums, XP 950, TKO 600 2 Tons of Fun Last edited by OrangeCrush1970; 02-03-2009 at 03:34 PM.