The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

stope4 · 02-14-2009, 09:19 PM

O.k. got to work on the manifolds today. I got all the bolts in the left side. Took me damn near four hours and a lot of cussing under my breath but all the bolts are in. I used a large craftsman screwdriver. It's about 18 - 24 inches long. Bent the end thirty degrees but it was the only way to get all the bolts in. I even had my wonderful wife on Valentine's day out there pulling on the screwdriver with a cheater bar. Flat out brute force very carefully and all is well. Now for the right side.

02-14-2009, 09:19 PM	#12
stope4 Registered User Join Date: Jan 2006 Location: Houston Posts: 434	Re: BB Exhaust Manifolds O.k. got to work on the manifolds today. I got all the bolts in the left side. Took me damn near four hours and a lot of cussing under my breath but all the bolts are in. I used a large craftsman screwdriver. It's about 18 - 24 inches long. Bent the end thirty degrees but it was the only way to get all the bolts in. I even had my wonderful wife on Valentine's day out there pulling on the screwdriver with a cheater bar. Flat out brute force very carefully and all is well. Now for the right side.