The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

r0lf- · 03-13-2003, 12:20 AM

I have a 80' Barebones C10 with a I6 and 3 on the tree. The only real heavy duty option I have is the radiator. I looked on the card in the glovebox that tells all the options and there is nothing about the heavy duty rotors in there.

I measured the rotors and they seem to be a bit more than 1".

The reason for this is because im ordering my drop spindles ASAP, im guessing I still have 1" rotors since its a barebones C10, not some HD C30 or 20.

03-13-2003, 12:20 AM	#1
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	Rotor Width. I have a 80' Barebones C10 with a I6 and 3 on the tree. The only real heavy duty option I have is the radiator. I looked on the card in the glovebox that tells all the options and there is nothing about the heavy duty rotors in there. I measured the rotors and they seem to be a bit more than 1". The reason for this is because im ordering my drop spindles ASAP, im guessing I still have 1" rotors since its a barebones C10, not some HD C30 or 20.