|
Re: electric water pump heater hose routing Q?
Quote:
Originally Posted by Senator350
I did not have my water plumbed when I ran my engine to test my ignition.
I have not had my engine running since then either...
BUT, I did run the electric water pump and my electric heater with the key in the accessory position. It circulated well, and I could hear most of the bubbles flushing out.
Whether or not it will all explode when there is water pressure and circulation through the block remains to be seen  |
OK, I still have some time before mine needs to work, so I'll wait and see how yours works out. I like your location, but it has to work, I'm concerned about the flow with the thermastat closed, but we'll see. I'll go down another path and see if I can get anywhere 
Mistake in the 3rd pic. is that I made it up using a 1/2" NPT bung, for a -12 AN (5/8") it needs to be a 3/4" NPT. So back to the drawing board
__________________
Semper Fi...Uncle Sam, you da man
All parts offered to help are free, unless otherwise noted
Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training
SAFETY FIRST
AS usual, off topic
They say your mind goes second, can't remember the first
Jim
Last edited by jaros44sr; 03-26-2009 at 07:47 AM.
|