The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Foosified · 04-03-2009, 08:57 AM

As the title states my pushrod is too long by about 1 1/2". I think it is about
4". I need one that is about 2.5". From what I could see there are two different lengths depending on booster make.

Does anyone know whereI can get a short one, or can i just cut down the longer one? If I do cut i will not have adjustment...

What about newer Chevy/GMC trucks do they use the shorter pushrod? I could check the wreckers, but don't know where to start.

Reason for change is I'm using the 76 Blazer M/C . I guess that would be the first truck to look at!

04-03-2009, 08:57 AM	#1
Foosified Registered User Join Date: Oct 2006 Location: Edmonton, AB, CAN. Posts: 152	1971 Vacumm Booster Pushrod Too Long As the title states my pushrod is too long by about 1 1/2". I think it is about 4". I need one that is about 2.5". From what I could see there are two different lengths depending on booster make. Does anyone know whereI can get a short one, or can i just cut down the longer one? If I do cut i will not have adjustment... What about newer Chevy/GMC trucks do they use the shorter pushrod? I could check the wreckers, but don't know where to start. Reason for change is I'm using the 76 Blazer M/C . I guess that would be the first truck to look at! __________________ May all your ups and downs be in the back of a Chevy!: Last edited by N2TRUX; 04-03-2009 at 06:02 PM. Reason: Wanted to buy/trade