Thread: spindle problem
View Single Post
Old 04-29-2009, 07:14 PM   #11
KB71C10BBSUPER
Registered User
 
KB71C10BBSUPER's Avatar
 
Join Date: Apr 2009
Location: Valley Center, Ca.
Posts: 37
Re: spindle problem

If you are using a 3" drop spindle with the stock steel rallys they will rub on the lower control arm also. I have found if you want to stay with a steel wheel only use 2.5" drop spindles this will prevent rubbing issues. 17" wheels will cure it with the correct backspacing or stock backspacing.
KB71C10BBSUPER is offline   Reply With Quote