The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Wrenchbender Ret · 05-11-2009, 05:52 PM

After removeing the yoke remove the retainer & you can replace the seal in the retainer. It takes a thick cork gasket behind it but you can use a thick bead of RTV.

05-11-2009, 05:52 PM	#4
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: Eaton Rear axle pinion seal. After removeing the yoke remove the retainer & you can replace the seal in the retainer. It takes a thick cork gasket behind it but you can use a thick bead of RTV.