|
Re: Clutch linkage problem
Quote:
Originally Posted by OxydizedBlue
I do not have a torch, but when I tried to line up the z-bar with the engine stud the clutch pedal piece that goes through the firewall was binding on the firewall.
|
Your problem may be resolved by moving this bracket back as suggested AND getting the V8 clutch pedal to Z-Bar rod. What does your clutch pedal rod look like? The I6 is a nearly straight rod, the V8 version has a "dogleg" in it. (or is it the other way around, i forget)
Also, your VIN's second character should be a letter indicating origial engine type:
I = straight 6
M = V6
E = V8
__________________
Currently on or near the homestead:
67 Chevy SWB 2WD stepside 350/3 on tree (Pat's)
67 GMC SWB 2WD Fleet 402/auto (Brian's under construction)
67 Chevy 3/4 ton 2WD 402/auto (Business Hauler)
67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC)
68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC)
70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC)
71 Chevy SWB stepside (Crushed by tree - parts donor)
72 Chevy 3/4 ton 4WD (Parts donor)
72 Chevy 3/4 ton 4WD Suburban (Parts Donor)
72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC)
81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler)
82 Camaro Z/28 355/Super T-10 (Pat's toy)
93 Caprice 9C1 (Brian's Cop Car)
02 Toyota Camry (Reliable but a souless steel and plastic hulk)
2011 2SS RS Camaro M6 Factory Hurst Shifter 
Maybe I need to sell some of this crap 
Yet another Bozo with a sawz-all
|