Re: what are u guys doing about the seam on the back of cab
the correct way to do the seam is
#1 clean it out to the bare shiny metal
#2 primer it GOOD with urethane or epoxy primer
#3 after the primer cure's seam seal it with sandable auto body seam sealer
#4 after the seam sealer is dry sand it lightly to obtain a factory look
it will last for year's !
__________________
1967 C10 Shortbed Fleetside Small back glass
6 cyl 3spd on the tree 3.08 gears
underdash AC
|