|
Re: Eaton Rear axle pinion seal.
I went out there under the truck and with e-brake on and truck in gear I can just rotate the driveline slightly clockwise/counterclockwise indicating the slight gear clearance that it has always had. I can turn the yoke effortlessly. nothing binding, just like it was when I checked it before bolting up the driveline to the yoke . I think the heat thing is just normal.
__________________
69 K-20 cloned to a 67 with front clip and some other stuff.
383 .040 over
Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears: 
|