The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - TX 72 cab bare swb frame 72 doors swb & lwb fleet beds step fenders no spare cut out

**WIDESIDE72** · 11-11-2009, 01:08 PM

68-72 swb fleet bed sides. These came from two different trucks.The driver side has had the stake pockets welded up. The pass side hasnt. The pass side will need the strip that bolts the bed side to the floor replaced. The driver side is OK. Both of them have a hole where the metal rusted away behind the rear tire, right at the corner. The pass side has a couple of dents. These will need work, but IMO are better metal than repros. which are almost always thinner and softer metal.

11-11-2009, 01:08 PM	#22
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 72 cab bare swb frame 72 doors swb & lwb fleet beds step fenders no spare cut out 68-72 swb fleet bed sides. These came from two different trucks.The driver side has had the stake pockets welded up. The pass side hasnt. The pass side will need the strip that bolts the bed side to the floor replaced. The driver side is OK. Both of them have a hole where the metal rusted away behind the rear tire, right at the corner. The pass side has a couple of dents. These will need work, but IMO are better metal than repros. which are almost always thinner and softer metal.