The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

AusTx68 · 01-23-2010, 08:20 PM

So most of the small stuff has been sold. I still have the items shown below available. I'm willing to take $2300 for the Heads & Roller Cam as a package deal. That's well below cost.

Too Much Stuff: 396 pulleys and pump $40 shipped

67Mach1: Cab dolly $100 - pickup

Sharpie1972: HEI $75 shipped

JimKshortstep4x4: lifters $32 shipped

snj8198: Manifold $225 shipped

68lowburb: Oil Pan w/pump & flywheel $110 shipped

Edelbrock Performer RPM Marine Heads
Assembled with Comp Cams valve train to support 304HR roller cam. Heads were purchased new and assembled by local speed shop. I bolted one head on the block. The other was never bolted up due to a block defect. I will throw in the correct ARP head bolts and head gaskets(a $200 value). Everything for $1800

New Comp Cams 304HR Roller Cam w/ roller lifters. Includes timing cover that has been modified with the correct cam end play and matching Comp Push Rods. All for $600

New black painted water pump with pulleys for a 454 $40

01-23-2010, 08:20 PM	#17
AusTx68 Registered User Join Date: Nov 2008 Location: Italy Posts: 1,278	Re: BBC Parts So most of the small stuff has been sold. I still have the items shown below available. I'm willing to take $2300 for the Heads & Roller Cam as a package deal. That's well below cost. Too Much Stuff: 396 pulleys and pump $40 shipped 67Mach1: Cab dolly $100 - pickup Sharpie1972: HEI $75 shipped JimKshortstep4x4: lifters $32 shipped snj8198: Manifold $225 shipped 68lowburb: Oil Pan w/pump & flywheel $110 shipped Edelbrock Performer RPM Marine Heads Assembled with Comp Cams valve train to support 304HR roller cam. Heads were purchased new and assembled by local speed shop. I bolted one head on the block. The other was never bolted up due to a block defect. I will throw in the correct ARP head bolts and head gaskets(a $200 value). Everything for $1800 New Comp Cams 304HR Roller Cam w/ roller lifters. Includes timing cover that has been modified with the correct cam end play and matching Comp Push Rods. All for $600 New black painted water pump with pulleys for a 454 $40 __________________ '68 C-10 SWB 383 Stroker (Sold 3/2/2013) '87 R2500 LWB 454 TBI converted to Carb Last edited by AusTx68; 01-23-2010 at 09:00 PM.