The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

71tahoe · 03-10-2010, 11:03 AM

When you say "restored truck" I'm thinking you don't have HEI ignition. Make sure your choke power is 12v. If you are running from the power wire to the coil it's not 12v. Check your timing and if you aren't running power brakes, make sure the port is plugged in the carb. Anything less simple than that and I'm stumped.

Let us know what you've eliminated and I'm sure you will get more suggestions.

03-10-2010, 11:03 AM	#4
71tahoe Registered User Join Date: May 2006 Location: Jonesboro, AR Posts: 916	Re: Sw Mo area Good with Edelbrocks When you say "restored truck" I'm thinking you don't have HEI ignition. Make sure your choke power is 12v. If you are running from the power wire to the coil it's not 12v. Check your timing and if you aren't running power brakes, make sure the port is plugged in the carb. Anything less simple than that and I'm stumped. Let us know what you've eliminated and I'm sure you will get more suggestions.