The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

OhOneWS6 · 03-21-2010, 10:06 AM

If you can do brakes you can do an intake. If your truck is running good now I would focus on getting the old water neck off and heli-coil the stripped hole. Chances are pretty good you will need to do some work to that Edelbrock carb from the looks of it. If the HEI is from the same place I bet it will need some work too. You can buy a new HEI from Skip White for less than it will cost you to tune up that old HEI.

Just my .02

03-21-2010, 10:06 AM	#2
OhOneWS6 Registered User Join Date: Dec 2009 Location: DFW, TX Posts: 764	Re: Edelbrock C4B If you can do brakes you can do an intake. If your truck is running good now I would focus on getting the old water neck off and heli-coil the stripped hole. Chances are pretty good you will need to do some work to that Edelbrock carb from the looks of it. If the HEI is from the same place I bet it will need some work too. You can buy a new HEI from Skip White for less than it will cost you to tune up that old HEI. Just my .02 __________________ 72 Cheyenne Super 1/2 LWB White/Dark Yellow 07 Avalanche 2LT 74 Sleek Craft Rebel Jet Boat W/Pontiac 400 Last edited by OhOneWS6; 03-21-2010 at 10:07 AM.