The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Wrenchbender Ret · 04-24-2010, 06:41 PM

Sounds like your timing is advanced way too much. Try moving it back a few degrees. You can clean up & lube the advance mech. on the old dist. You have to take The gear off & remove the shaft.

04-24-2010, 06:41 PM	#5
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: Distributor issues Sounds like your timing is advanced way too much. Try moving it back a few degrees. You can clean up & lube the advance mech. on the old dist. You have to take The gear off & remove the shaft.