|
Re: Where to start?
I agree with getting it running.80K isn't a lot of miles on a 350.Go fot it and see how it runs.Brakes are available at any auto parts store.After setting that long I would replce all 4 wheel cylinders,the shoes and the MC.Probably need to do a new Master cylinder also.Drive it a bit after you get it running and safe .Start carrying a notebook and figuring out how you will use the truck and what things you can't live with.Then come up with a plan and stick to it.If you change the plan midstream it will cost you.Most of the mechanicals are reasonable($) to do.The paint and body are where it gets pricey.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion.
You can't fix stupid,not even with duct tape.
"My appearance is due to the fact that "GOD" does punish you for having too much fun!"
Barrett-Jackson has perfected alchemy,they make rust into gold!
"You can lead a horse to water but you can't saddle a duck"
"Cleverly disguised as a 'Responsible Adult'
"Sometimes your Knight in shining armor is just a retard in tinfoil"
|