The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

colin_havens · 06-25-2010, 12:48 PM

Not mine, but a friend of mine in our car club. He is bagged with a z and tubular arms up front, and suicide doors notch in the back on the stock trailing arms. Also has a 1 inch bodydrop, so lays rocker.

I would still switch over to a good 4 link eventually, as you get alot less pinion change and a cleaner setup. But you it can be done. Thats the only reason he went this route is to show he could do it, because everyone told him there was no way he could. Pics below:

06-25-2010, 12:48 PM	#4
colin_havens Registered User Join Date: Dec 2007 Location: Mountain Home, AR Posts: 405	Re: C notch with trailing arms Not mine, but a friend of mine in our car club. He is bagged with a z and tubular arms up front, and suicide doors notch in the back on the stock trailing arms. Also has a 1 inch bodydrop, so lays rocker. I would still switch over to a good 4 link eventually, as you get alot less pinion change and a cleaner setup. But you it can be done. Thats the only reason he went this route is to show he could do it, because everyone told him there was no way he could. Pics below: