The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

highliner · 08-13-2010, 11:24 PM

Mine had moulding from the factory, but because most of the hardware is impossible to reach without disassembling the fenders, I put the little bolt and nut clip front and back and taped the rest. Be sure to use the dark exterior tape. It's a lot thinner and less noticeable than the regular white stuff.

08-13-2010, 11:24 PM	#7
highliner Registered User Join Date: Feb 2009 Location: West Point, UT Posts: 29	Re: upper and lower side mouldings... Mine had moulding from the factory, but because most of the hardware is impossible to reach without disassembling the fenders, I put the little bolt and nut clip front and back and taped the rest. Be sure to use the dark exterior tape. It's a lot thinner and less noticeable than the regular white stuff. __________________ 72 C-10 Longbed (3rd generation truck) 79 K-15 Shortbed SBC400 4in. lift super swampers 05 2500HD Crew 6.0L 39 International P/U (future rat rod)