Quote:
Originally Posted by 6772owner
I would think the driveline angles would be corrected in the spring packs, they usually include shims built right in. I sold truck accessories for 6 years and never saw a lift that big that didnt have the shims right on the packs. You will definetly need the shafts extended, I would look into the 8" and make sure that you dont need a CV stlye driveshaft or have to "reclock" the transfer case. If it is a S/B, I would be concerned of the rear driveshaft angle at that height. Just my .02
|
Mind if i pick your brain for some info? I have A 72 3/4t and about 12 years ago i put a 4" rancho kit on it that has front springs and rear blocks with 5000 series shocks, it definantly made foe a much bumpier ride than stock.
I'm getting close to the point where i want to go ahead and replace the rear blocks with a spring kit so was looking at this kit:
http://www.4-wheel-drive-lift-kits.c...r-springs.html
Do you think from your experiance that this kit will have a better ride than the rancho kit i have? Thanks!