The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Truck fuse panel. Yes the cig should have 12 volts all the time. Do as I did. Buy a fuse panel at radio shack connect it to the 12 volt source in the main fuse block then run all the stuff you want off of it.

__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71

Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour

http://upstategmtrucks.com/

Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-24-2010, 10:56 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: constant power line. I might be stupid. Truck fuse panel. Yes the cig should have 12 volts all the time. Do as I did. Buy a fuse panel at radio shack connect it to the 12 volt source in the main fuse block then run all the stuff you want off of it. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.