The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

drunkbus · 11-01-2010, 06:14 PM

The only problem I had on the other end was getting the clip into the groove. There should be a bracket that the end of the line sticks through and a clip goes onto the backside into a groove on the end of the brake line to hold it in place. I just had to file out the groove a little bit. Other than that the new brake line fit with the old hard line just fine. Maybe you got a line for a different model year? I had a few heated conversations with the hillbillies at Skyjacker over some other things. I like their products but their customer service and organizational skills leave something to be desired.

11-01-2010, 06:14 PM	#5
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: Rear Brake Fitting? The only problem I had on the other end was getting the clip into the groove. There should be a bracket that the end of the line sticks through and a clip goes onto the backside into a groove on the end of the brake line to hold it in place. I just had to file out the groove a little bit. Other than that the new brake line fit with the old hard line just fine. Maybe you got a line for a different model year? I had a few heated conversations with the hillbillies at Skyjacker over some other things. I like their products but their customer service and organizational skills leave something to be desired.