The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dwcsr · 11-10-2010, 01:34 PM

After market panels are all thinner than originals. As far as I can see its usually the closest MM under the gauge of the original panel. That doesn't add to much on a pillar panel or cab corner but its a lot on a rear fender or door or bed side. Doors are always a problem no matter who you buy from. Each production run can have its own issues and fit problems.
I know Key which sells Tri-plus is usually 18 gauge or thicker depending on the panel. Don't know about Counter Parts.

11-10-2010, 01:34 PM	#12
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: Key Parts Vs. Counterpart After market panels are all thinner than originals. As far as I can see its usually the closest MM under the gauge of the original panel. That doesn't add to much on a pillar panel or cab corner but its a lot on a rear fender or door or bed side. Doors are always a problem no matter who you buy from. Each production run can have its own issues and fit problems. I know Key which sells Tri-plus is usually 18 gauge or thicker depending on the panel. Don't know about Counter Parts.