SM465 Question
I pulled the shifter out of my sm465 to install the cab after it was painted. After I reinstalled the shifter, it will not go into any gear, clutch in or out transfer case in gear or out. My question is this: Could the trans be stuck between gears or not in neutral when I install the shifter? If this is the case, what do I need to do? Pull top cover and align or can I do this through the shifter tower hole? If the truck were not so original this would have been solved by an automatic but I was stubburn and left it as it came. Any help is appreciated. Thanks Harold
__________________
67 blue step side- bb
68 gold and white swb cst anniversary
68 custom swb hot rod Ls swap
69 swb cst 6 cylinder/ overdrive
69 black/black cst bb swb
70 orange and white cst Canada built truck swb bb
71 black and white super swb bb
71 red and white super swb
72 green and white super swb 4x4
62 nova wagon 400 series Ls swapped
68 Camaro 327/4 speed- 1 owner, original paint
66 Volkswagen bettle
69 auto stick Volkswagen Beetle
Last edited by 71 super; 11-22-2010 at 12:04 AM.
|