The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

breezy · 12-13-2010, 10:03 PM

I would not worry about it. If it hits I would say your motor mounts need replaced or you have alot of ponies and very sticky tires. Thanks for posting the pics of that header. I had a post asking if people had used these and didn't get much response. I'm going to get these in the elite series with the ball and socket connector and coated. They look like they fit well to me and the elite have a 3/8 flange at the motor, so shouldn't leak with any luck.Are the plugs easy to get at?

12-13-2010, 10:03 PM	#7
breezy Registered User Join Date: Oct 2010 Location: Palaskifield,Mo. Posts: 71	Re: Header clearence w/pics I would not worry about it. If it hits I would say your motor mounts need replaced or you have alot of ponies and very sticky tires. Thanks for posting the pics of that header. I had a post asking if people had used these and didn't get much response. I'm going to get these in the elite series with the ball and socket connector and coated. They look like they fit well to me and the elite have a 3/8 flange at the motor, so shouldn't leak with any luck.Are the plugs easy to get at? Last edited by breezy; 12-13-2010 at 10:05 PM.