The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

K20-69-POS · 12-15-2010, 07:41 PM

What type of U joint should I use when I switch the eaton rear end with a 14 bolt?

Also, did the NP208 ever come with a fixed yoke, because the transfer case in the truck (my friend's 1969 K20 with a 292 and a 4 speed) is a fixed yoke?

If its not an NP208 what is it, NP205 203?

Also my last question what tranny is in the truck, it has 4 forward gears with the first one being a granny I think, in that it is not synconized with the rest of the tranny. So is it an SM240 or an SM465?

12-15-2010, 07:41 PM	#1
K20-69-POS Registered User Join Date: Sep 2010 Location: state college, pa Posts: 86	Drivetrain questions? What type of U joint should I use when I switch the eaton rear end with a 14 bolt? Also, did the NP208 ever come with a fixed yoke, because the transfer case in the truck (my friend's 1969 K20 with a 292 and a 4 speed) is a fixed yoke? If its not an NP208 what is it, NP205 203? Also my last question what tranny is in the truck, it has 4 forward gears with the first one being a granny I think, in that it is not synconized with the rest of the tranny. So is it an SM240 or an SM465? __________________ '69 K20 292 4spd 4x4 - project 27,000 orig. miles '98 1500 suburban 4x4 - driver 219000 orig. miles