The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - CA WTB/WTT

longhorn70gmc · 12-27-2010, 06:03 PM

Hey Andrew,
I went home and measured the rims the best I could. I still have tires on them, so I had to adjust. Rim wise, from the side of it measures about 7 1/2 to 8.0 inches. The front of the rim measured out at 2 1/2 to 3 inches from inside to outer lip, there not deep dish, but they have some deph to them. One of the tires read out at 8.75 R16.5LT and the other three read out at 9.50 R16.5 LT. There was a consistant stamp on the front that had the number 7 on them. Let me know if there is another way to measure them. They are all four GM and are the same. They have hub cap lips on them for caps.
R/

12-27-2010, 06:03 PM	#7
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: WTB/WTT - 16.5 steel wheels Hey Andrew, I went home and measured the rims the best I could. I still have tires on them, so I had to adjust. Rim wise, from the side of it measures about 7 1/2 to 8.0 inches. The front of the rim measured out at 2 1/2 to 3 inches from inside to outer lip, there not deep dish, but they have some deph to them. One of the tires read out at 8.75 R16.5LT and the other three read out at 9.50 R16.5 LT. There was a consistant stamp on the front that had the number 7 on them. Let me know if there is another way to measure them. They are all four GM and are the same. They have hub cap lips on them for caps. R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!