|
Re: Tilt Column Shifting Linkage Question
Linkage should be the same, adjustment is accomplished through the bolt/clamp that holds the linkage to the column arm. Put the truck in park loosen the 9/16 nut and release the clamp. Climb underneath and put the trans in park if not already and tighten clamp. Pull through range if still not in low put shifter in low position and pull trans side arm into low tighten nut and should be good. If I remember correctly the curved linkage rod is for th400 and straight is for th350
__________________
67 blue step side- bb
68 gold and white swb cst anniversary
68 custom swb hot rod Ls swap
69 swb cst 6 cylinder/ overdrive
69 black/black cst bb swb
70 orange and white cst Canada built truck swb bb
71 black and white super swb bb
71 red and white super swb
72 green and white super swb 4x4
62 nova wagon 400 series Ls swapped
68 Camaro 327/4 speed- 1 owner, original paint
66 Volkswagen bettle
69 auto stick Volkswagen Beetle
|