The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

bonestock70 · 02-27-2011, 12:29 AM

Okay, the "Long" Throwout Bearing arrived in the mail finally and was much cheaper and available online. This was a part I had a little trouble finding. I pulled out the trans last weekend and put the new bearing in and it looked good. I didn't know for sure that everything worked until yesterday when I got all of the linkage parts installed and adjusted it and it feels great.

That WAS the problem.

So, in short, thanks to all who gave me advice here. Much appreciated.

02-27-2011, 12:29 AM	#30
bonestock70 Registered User Join Date: Sep 2010 Location: Yorba Linda, ca Posts: 9	Re: 70 c10 clutch adjustment question Okay, the "Long" Throwout Bearing arrived in the mail finally and was much cheaper and available online. This was a part I had a little trouble finding. I pulled out the trans last weekend and put the new bearing in and it looked good. I didn't know for sure that everything worked until yesterday when I got all of the linkage parts installed and adjusted it and it feels great. That WAS the problem. So, in short, thanks to all who gave me advice here. Much appreciated.