The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

'63GENIII · 03-15-2011, 01:48 AM

The 396 in mine seems to have stock mounts. I think mine came with a 283 original. Not too sure though. Uses 1 large bolt to the frame through the motor mounts, no crossmember, firewall is not beat in and running an HEI with limited clearance. TH 400 and a rockwell T221. What kind of transmission / transfer case are you running?

03-15-2011, 01:48 AM	#2
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: BBC into a 66 K10 The 396 in mine seems to have stock mounts. I think mine came with a 283 original. Not too sure though. Uses 1 large bolt to the frame through the motor mounts, no crossmember, firewall is not beat in and running an HEI with limited clearance. TH 400 and a rockwell T221. What kind of transmission / transfer case are you running? __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29