The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

TobyArnot · 03-18-2011, 10:03 PM

O.K. - I have a '70 stepper with factory deluxe (non-A/C) heater. Long story short, I need the part of the inside duct that makes the 90* turn. The PO installed an underdash A/C that requires trimming the 90* duct. Unfortunately he went over board and kinda butchered the cut and the damper inself. Does anyone have this piece of heater duct and baffle (used, preferrably), for cheap. I can salvage about any decent part. Thanks. in advance, for the help

03-18-2011, 10:03 PM	#1
TobyArnot Quit if it's not FUN!!! Join Date: Jul 2010 Location: Indian Trail, N.C, Posts: 864	Heater Parts Needed O.K. - I have a '70 stepper with factory deluxe (non-A/C) heater. Long story short, I need the part of the inside duct that makes the 90* turn. The PO installed an underdash A/C that requires trimming the 90* duct. Unfortunately he went over board and kinda butchered the cut and the damper inself. Does anyone have this piece of heater duct and baffle (used, preferrably), for cheap. I can salvage about any decent part. Thanks. in advance, for the help Attached Images Last edited by TobyArnot; 03-19-2011 at 01:38 AM. Reason: added picture