The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Altec · 03-21-2011, 12:10 AM

As far as I know all NP208 465's are 32-spline round pattern. So if you have a figure-8 style pattern case that is 10-spline the easiest option would be to find the matching tranny.

Or do what I am doing. I found a 32-spline 465 with a NP208. I'm going to use this combination until I can find a 32-spline NP205.

Edit,

A SM420 should also bolt right up to your 10-spline NP205 IIRC.

03-21-2011, 12:10 AM	#2
Altec Getcha Pull Join Date: Nov 2010 Location: MD Posts: 691	Re: Question about SM465 output shafts. As far as I know all NP208 465's are 32-spline round pattern. So if you have a figure-8 style pattern case that is 10-spline the easiest option would be to find the matching tranny. Or do what I am doing. I found a 32-spline 465 with a NP208. I'm going to use this combination until I can find a 32-spline NP205. Edit, A SM420 should also bolt right up to your 10-spline NP205 IIRC. __________________ '81 K10 454/SM465 '86 S10 Blazer '95 H-D Softail '96 Integra Last edited by Altec; 03-21-2011 at 12:11 AM.