The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68gmsee · 05-05-2011, 10:12 AM

ttt:

You would probably get some good input in the paint and body section of this site. There's not too many members that frequent that forum but lots of experienced members check it out periodically.

I'm not good at sheet metal work so if it were my truck, I'd look into replacing the top or the whole cab depending on how bad it is. I've got one that's not as bad as yours and am considering a different cab. The top of these trucks are not the easiest parts to fix and you may not be able to get all of the parts you're looking for.

05-05-2011, 10:12 AM	#2
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: What direction to take with my cab ttt: You would probably get some good input in the paint and body section of this site. There's not too many members that frequent that forum but lots of experienced members check it out periodically. I'm not good at sheet metal work so if it were my truck, I'd look into replacing the top or the whole cab depending on how bad it is. I've got one that's not as bad as yours and am considering a different cab. The top of these trucks are not the easiest parts to fix and you may not be able to get all of the parts you're looking for.