The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Mike Bradbury · 05-25-2011, 03:27 AM

My opinion is that if they were installed per spec why do you want to shoot grease into them. They should have been greased before you installed them and not need any more for quite sometime. I have a 69 and mine did not need any more grease after install. Just makes a big mess if it starts oozing out the cup. but if you feel the need to grease them more maybe more preasure on the nozzle, maybe it is not getting past the ball valve

05-25-2011, 03:27 AM	#4
Mike Bradbury Registered User Join Date: Apr 2008 Location: San Diego California Posts: 1,316	Re: control arm bushings My opinion is that if they were installed per spec why do you want to shoot grease into them. They should have been greased before you installed them and not need any more for quite sometime. I have a 69 and mine did not need any more grease after install. Just makes a big mess if it starts oozing out the cup. but if you feel the need to grease them more maybe more preasure on the nozzle, maybe it is not getting past the ball valve __________________ I'd rather attempt something great and fail.. than try something ordinary and succeed. Norman Vincent Peale Project: Barn Raising http://67-72chevytrucks.com/vboard/s...d.php?t=414961 Project: 30 Be Low https://67-72chevytrucks.com/vboard/...d.php?t=830583 Last edited by Mike Bradbury; 05-25-2011 at 03:31 AM.