Quote:
Originally Posted by Fitz
I used M&H for my 67 stepper. They sent EVERYTHING and used OEM wire sizes, colors and connectors so when you go to plug everything up it fits! The only difference between my harness and the stock one was the electronic ignition and Vintage Air A/C unit and they put the right connectors and wiring in the harness for no extra charge. I had expected to take a week or two wiring because of the changes but had all of it done in one day.
http://www.wiringharness.com/
M&H Electric Fabricators, Inc.
13537 Alondra Blvd.
Santa Fe Springs, CA 90670 |
They are definitely good, and because of that sometimes you'll have a wait. If you need it in a hurry, better call them before you order.