|
Re: question of the year
In my opinion, and it's just that, an opinion, it doesn't matter if it's made here, there or somewhere in between. Different company's have different tolerances. Company "A" will make a part 4" long with a 3/8" hole +- 1/16" and centered +- 1/16". Company "B" make the same part with 1/8"+- tolerances. If "A" makes it 1/16" to the left and "B" makes it 1/8" to the right there is a 3/16" difference. It doesn't sound like much but in some case 1/16" can seem like a mile. Like I said this is all my opinion so take it for what it's worth. (not much)
__________________
Matt
 
'69 Chevy SWB Fleet, Primer Black; Project No Name
'06 Chevy Trailblazer, Blueish Silver?; Wifes DD, Sold
'08 Chevy Impala SS, Silver; the new DD, AND IT IS FUN!!!
'99 Dodge Dakota R/T, Intense Blue; DD, Sold
Quote:
Originally Posted by longbed67
The tig welds are not the prettiest i have seen but they do have good penetration.
|
Quote:
Originally Posted by oldblue1968chevy
There are two things in life where penetration is really important.....and one of them is welding.
|
|