The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

crazymason · 08-25-2011, 01:53 PM

Looks like a nice C20 you have there Special-K, and I hear what you are saying. Believe me I am worried about modding this truck and regretting it after, which is why I will probably be asking a lot of questions around here

So lets forget about lowering. How the heck do I figure out a proper staggered wheel/tire setup? I would be a happy man if I had a wheel tire combo just like the one in my last post, but in satin black.

Here is what I have found so far, let me know if I am on the right track. I have been looking at Black Rock wheels http://www.blackrockwheels.com/

Specifically the Type 8 Series 997: http://www.blackrockwheels.com/produ...Type8Series997

For the rear wheels: 16"x10" with -34mm offset

For the front wheels: I could go with 16"x 8 with 0 offset or the other option -6mm offset

OR for the front I could use the Black Rock Yuma 908B http://www.blackrockwheels.com/produ...YumaSeries908B 16x8 with 0 offset

So, would I be correct in assuming the steel wheels I have on now are close to 0 offset? Would I also be correct in assuming that the wheels with more negative offset will have a deeper dish?

Opinions on these wheels, am I on the right track? Any other suggestions?

08-25-2011, 01:53 PM	#16
crazymason Registered User Join Date: Jul 2011 Location: Vancouver Island/Calgary Posts: 22	Re: Help me stance my new c20 Looks like a nice C20 you have there Special-K, and I hear what you are saying. Believe me I am worried about modding this truck and regretting it after, which is why I will probably be asking a lot of questions around here So lets forget about lowering. How the heck do I figure out a proper staggered wheel/tire setup? I would be a happy man if I had a wheel tire combo just like the one in my last post, but in satin black. Here is what I have found so far, let me know if I am on the right track. I have been looking at Black Rock wheels http://www.blackrockwheels.com/ Specifically the Type 8 Series 997: http://www.blackrockwheels.com/produ...Type8Series997 For the rear wheels: 16"x10" with -34mm offset For the front wheels: I could go with 16"x 8 with 0 offset or the other option -6mm offset OR for the front I could use the Black Rock Yuma 908B http://www.blackrockwheels.com/produ...YumaSeries908B 16x8 with 0 offset So, would I be correct in assuming the steel wheels I have on now are close to 0 offset? Would I also be correct in assuming that the wheels with more negative offset will have a deeper dish? Opinions on these wheels, am I on the right track? Any other suggestions?