|
Re: My balancer doesn't have a timing mark on it
TDC is the exact same place on the balancer weather the compression or exhaust stroke
the proper way is with aid of a piston stop you slowly turn by hand till it is stopped by the piston stop make a referance mark then turn in oppisit direction till you are again stopped by the piston stop make another referance mark/// dead center between those two referance marks is TDC
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane
MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF
DONT BELIEVE EVERYTHING YOU THINK
TAKE MY ADVISE;I DON'T USE IT ANYWAY
|