The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Shyguy · 10-02-2011, 07:59 AM

You said you changed the ignition switch, maybe it is a bad one. Did you change the switch or just the tumbler setup?

You can disconnect the wires from the back of the switch and with a voltmeter or test light see if any of them are hot pretty easy, this will tell you if there is power coming from the battery.

10-02-2011, 07:59 AM	#9
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: Baby won't start You said you changed the ignition switch, maybe it is a bad one. Did you change the switch or just the tumbler setup? You can disconnect the wires from the back of the switch and with a voltmeter or test light see if any of them are hot pretty easy, this will tell you if there is power coming from the battery. __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.