The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

creepdogg · 10-10-2011, 09:46 AM

I need someone's help! I have a 70c10 1/2 ton front end on my build, I am trying to get ahold of the upper washer that sits between the crossmember and the upper control arm cross shaft. Its about 1/2 in thick and is flat on one side but dished in on the other. I have a 72 GMC frame but it has different spacers. I was going to try to order from LMC, but I have no idea if the part in their breakdown is the correct one. And their cust suppt is for crap if you ask me.

10-10-2011, 09:46 AM	#1
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Upper Control Arm Spacer I need someone's help! I have a 70c10 1/2 ton front end on my build, I am trying to get ahold of the upper washer that sits between the crossmember and the upper control arm cross shaft. Its about 1/2 in thick and is flat on one side but dished in on the other. I have a 72 GMC frame but it has different spacers. I was going to try to order from LMC, but I have no idea if the part in their breakdown is the correct one. And their cust suppt is for crap if you ask me.