The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

PanelDeland · 10-20-2011, 09:15 PM

The Bracket that pivots.Needs to come out.It cradles the pumpand the pump bolts to it.The two bolts(front and rear) need to come out.Then the pump with that bracket will come out.You can then remove the pump.Take the Hoses off before you do any of it though as it is hard to hold the pump still while trying to loosen them.

Once the bracket piece and pump are out the pump will swivel out of that bracket.

10-20-2011, 09:15 PM	#3
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: PS Pump Removal The Bracket that pivots.Needs to come out.It cradles the pumpand the pump bolts to it.The two bolts(front and rear) need to come out.Then the pump with that bracket will come out.You can then remove the pump.Take the Hoses off before you do any of it though as it is hard to hold the pump still while trying to loosen them. Once the bracket piece and pump are out the pump will swivel out of that bracket. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"