View Single Post
Old 11-17-2011, 08:00 PM   #1
JimmyFloyd
Registered User
 
Join Date: Apr 2009
Location: Rochester, NY
Posts: 1,458
67 grill, sub spare tire, and more

Looking to sell some of my spare parts that I will not be needing. These parts are located in Binghamton, NY, but I can bring them back up to rochester with me sunday if there is interest in them. i will not be bringing them up unless someone is serious about them.




1) 1967 or 1968 chevy Truck Grill for sale. One of the best looking grills for the 67-72 trucks. This one is in great shape. There are no rust holes on this grill, and very minumal surface rust, just a little on the inside. There are also no dents on the grill itself. Included with the grill is the center support with hood latch, emblem in fair shape with some pitting, and two painted grill hoops. The hoops are in good shape, with 1 minor ding on each that might be abl to br fixed. The lower splash shield that connects to the botton of the core support is also there and solid. This is a great piece and a rare find in the Northeast in this condition. Slap a coat of paint on it and it's ready to be a nice driver quality, or fix the minor imperfections and it'll be show ready. Asking $120 for it. PENDING LOCAL

















2) 1967 - 1972 Chevy or GMC pickup truck upper cab/windshield patch panel. This is a partial roof cut that was temoved 4 inches down from the top of the windshield, and 6-8 inches back from the front drip rail. This is a good patch if you have rust in the upper windshield area, or on the front part of the roof, either inside or outside. There is a small amount rust through on the lower side where the door would be, but this does not affect the above mentioned areas. This is a great patch piece, and is all original metal. Asking $30















3) 1967-1972 Chevy or GMC Suburban Spare Tire Well. This is the piece where the Spare Tire sits in the back of the Suburbans. It is known to collect dirt and debris and rust out very easily. This piece was removed from a 1970 and is in great shape. it is very solid, with some minor surface rust from age. These are NOT reproduced, and are hard to come by in good shape. Asking $60







4) Also have a rear drive shaft from a 1970 3/4 4x4 GMC suburban. It is very large and in great shape. It was behind a 350/TH350/NP205 combo and attached to a Eaton HO72 rear axle. Asking $30 - Probably scrapping it SCRAPED!





5) 69-72 Blazer passenger side Flip Forward seat. Dirty, but in good shape. Stitching pulling a little on one side. Missing front swivel bracket, but have the rear hold down one for it. Very hard to find complete with good foam and back. Asking $100





6) Stepside rear tail lights. Asking $25







7) 67 Suburban Glove Box door. Slight rust on it. Have the emblem, but 2 studs broke. One still in door, so it could be glued. $20





8) Radio Delete plates. Have 3. 2 have 2 clips, 1 only has one. $15 each





9) Blazer Fuel Filler Cover in great shape. Some surface rust on the inside, but no holes. Hard to find in this shape. $40 SOLD!!!







10) Single Spicer 8 lug Locking Hub. Same as Chevy, but says ford. Not broken. Used shape, but looks to be in good physical shape. Came off a 8 lug D44 HD front axle. Might work on a D60 $20

__________________
1970 Blazer 350/SM465/205 SOLD! | 1998 Z3

Last edited by JimmyFloyd; 12-01-2011 at 11:31 AM.
JimmyFloyd is offline   Reply With Quote