The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

odog · 02-28-2012, 09:45 PM

I cant get any #'s without pulling the trans. I know the retainer is 4 11/16 inches. 4 bolt holes around it

This is novacks billit design Name: sm_420_front_retainer_b-3761982.jpg
Views: 832
Size: 19.2 KB

Name: sm_420_front_retainer_b-3761982.jpg
Views: 832
Size: 19.2 KB

And this is what it looks like on the trans Name: sm420_transmission.jpg
Views: 853
Size: 21.1 KB

. I dont know much else. I think mine may be cracked as it is leaking 80/90 out the front pretty bad, either that or the seal is bad. I would like to have both seal and retainer when I pull the trans out so I can just fix it and put it back together.

Thanks

Erik

02-28-2012, 09:45 PM	#3
odog Registered User Join Date: Oct 2007 Location: Wendell, Idaho Posts: 608	Re: WTB Front Bearing retianer sm420 I cant get any #'s without pulling the trans. I know the retainer is 4 11/16 inches. 4 bolt holes around it This is novacks billit design And this is what it looks like on the trans . I dont know much else. I think mine may be cracked as it is leaking 80/90 out the front pretty bad, either that or the seal is bad. I would like to have both seal and retainer when I pull the trans out so I can just fix it and put it back together. Thanks Erik __________________ 1969 4x4 Nothing beats a good rock drill and some dynamite