The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Todd68Chevy** · 02-29-2012, 09:16 PM

I really do not know what the transmission is that I got the parts off of. The transmission case looks like it has a casting #C-95948 D. I need to clean the bearing retainer up and recheck but it looks like it has a casting #97127. I measure it out at 4 5/8" diameter. I found this web site http://www.novak-adapt.com/knowledge...on_gateway.htm and it states the New Process has an aluminum top cover and this one is cast iron. It also states the SM420 was used up to 1967 and the SM465 were used 1968 and newer. I will get it cleaned tomorrow and get better pictures. Thanks

02-29-2012, 09:16 PM	#8
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: WTB Front Bearing retianer sm420 I really do not know what the transmission is that I got the parts off of. The transmission case looks like it has a casting #C-95948 D. I need to clean the bearing retainer up and recheck but it looks like it has a casting #97127. I measure it out at 4 5/8" diameter. I found this web site http://www.novak-adapt.com/knowledge...on_gateway.htm and it states the New Process has an aluminum top cover and this one is cast iron. It also states the SM420 was used up to 1967 and the SM465 were used 1968 and newer. I will get it cleaned tomorrow and get better pictures. Thanks __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.