|
Re: Finally starting my Longhorn 4x4 conversion
Quote:
Originally Posted by MrBeast
OH THAT IS FRIKING SWEET!
What kind of tubing do you use for that?
|
Thanks. I use mandrel bent exhaust tubing. Sometimes on the turbo hot pipe I use schedule 40, but it's harder to make fit in tight areas due to the larger radius bends. Since the exhaust tubing isn't as thick as the schedule 40 pipe, I add gussets on the out side of the exhaust tubing to the flange where I can to help it keep from splitting out. Some I didn't do it too and haven't had a problem. I'm getting anxious to get this thing going! 
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project
Tired of spark plugs? Check this out.
|