The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Zoomin · 06-13-2012, 03:11 PM

Apart from the SPID, there's a few other clues. Most obviously, it should have a Super badge on the front fenders just below the Cheyenne badge. It should have simulated wood on the door panels, glove box door, and dash, as well as on the lower exterior trim and tailgate band. It should have a chrome tailgate handle if it's a 71 or a stainless handle for 72's. It should have a houndstooth cloth insert if it's a bench seat truck.

Tough items to fake are the headliner and a light on the back of the cab.

It also seems like all half tons had a special GVWR of 5400 too.

06-13-2012, 03:11 PM	#5
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Cheyenne Super identification Apart from the SPID, there's a few other clues. Most obviously, it should have a Super badge on the front fenders just below the Cheyenne badge. It should have simulated wood on the door panels, glove box door, and dash, as well as on the lower exterior trim and tailgate band. It should have a chrome tailgate handle if it's a 71 or a stainless handle for 72's. It should have a houndstooth cloth insert if it's a bench seat truck. Tough items to fake are the headliner and a light on the back of the cab. It also seems like all half tons had a special GVWR of 5400 too. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro Last edited by Zoomin; 06-13-2012 at 03:36 PM.