The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ryans69chevy · 06-22-2012, 08:05 PM

I got the nut off off the arm, (it was a 1" 5/16 nut). I still can't remove the box though... It almost seems like the bolt that hangs down under the arm that that nut was screwed to is attached to the arm itself. Cuz when I lift the gear box up and down it moves a little bit, but the bolt hanging below doesn't look like it's moving... I'll try using a puller see what happens. Any other ideas?

Thanks,
Ryan

06-22-2012, 08:05 PM	#5
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: How to remove the Steering Gear Box? I got the nut off off the arm, (it was a 1" 5/16 nut). I still can't remove the box though... It almost seems like the bolt that hangs down under the arm that that nut was screwed to is attached to the arm itself. Cuz when I lift the gear box up and down it moves a little bit, but the bolt hanging below doesn't look like it's moving... I'll try using a puller see what happens. Any other ideas? Thanks, Ryan